INCINÉRATEUR DE DÉCHETS MÉDICAUX (50 C 60kg / h)
Incinérateur de déchets médicaux, 50 à 60 kg / h Support Projet d’appui au secteur de la santé Point d’installation […]
محرقة المستشفى
معلومات أساسية. نموذج رقم: تصميم محرقة المستشفى مصادر السحب: معالجة النفايات الصلبة طرق المعالجة: الاحتراق أسواق التصدير: عالمية وصف المنتج
Incinerator with Capacity of destruction in weight: 60 Kg/h.
Capacity of destruction in weight: 60 Kg/h. It should be able to operate not less than 10 hours/day This incinerator
incinerador de desechos médicos
Cadenas de elevación: debe ser una cadena de elevación doble de estilo de rodillo y debe cumplir con un
Pyrolysis Deemed a Viable Alternative to Incinceration
Researchers at the University of York have concluded that PyroPure (UK) technology has the capacity to alter the way in
Controlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Incineradores em contêineres
Modelo CA50 Capacidade de alimentação Média de 60 kg por alimentação Taxa de queima Média de 70 kg por hora
Controlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
محرقة نفايات الحيوانات
وصف المنتج 1. تحفظ شركة Clover Medical Limited جميع الحقوق الخاصة بإصلاح / تحديث معلومات المنتج على موقع الويب. المواصفات
ESPECIFICACIONES DEL INCINERADOR Capacidad HASTA 20 kg / h
Tamaño: 940 x860x2700 milímetro Material: PILA DE ACERO INOXIDABLE, REVESTIMIENTO DE HORMIGÓN REFRACTARIO MATERIAL DE AISLAMIENTO ESPECIAL Con quemador: 15
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
pequeño incinerador en venta
Tiempo de esterilización: aprox. 30 minutos a 121 ° C / 1,1 bar o aproximadamente 15 minutos a 132 °
Un autre défi: l'élimination des déchets
Un seul patient d’Ebola traité dans un hôpital américain produira huit barils de 55 gallons de déchets médicaux chaque jour.
MEDICAL WASTE INCINERATOR (50 C 60kg/hr)
Medical Waste Incinerator, 50 to 60 Kg/hr Support Health Sector Support Project Point of Installation (Hospitals) Moi Voi, Makindu, Maragua, Eldama Ravine and Isiolo District Hospitals 1. General Description Supply, delivery, installation and commissioning of a medical waste incinerator suitable for disposal of Medical, General and Pathological waste in a safe and clean environment. The unit shall consist of two chambers and operate on the principal of controlled air and temperature. The unit shall consist a particulate remover (scrubbers) as stipulated in waste management regulations, 2006 (Legal notice NO. 121 of 29th September, 2006). The Unit shall be fully automatic and controlled by an automatic electronic controlled system except loading system which shall be manual. The unit shall be capable of incinerating between 50 to 60 kg of solid medical waste per hour. It shall be constructed from mild or aluminized steel lined with refractory material. Main unit Application For incineration, general and pathological Capacity 50 C 60 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10%
Hersteller und Exporteur von China-Verbrennungsanlagen
Primärbrennkammer Abfallladetür: Mit feuerfester Auskleidung mit Dichtungen versehen Asche entfernte Tür: Mit feuerfester Auskleidung mit Dichtungen versehen Außenkörper MOC: Flussstahl,